7" DEFCON Tile Saw

Introducing a light weight, heavy duty saw, that is somewhere between contractor quality and DIY quality. This saw will rip a 24" tile and will diagonally cut an 18" tile corner to corner. It features a 900 watt direct drive motor which will give you excellent service and plenty of power when cutting all tiles - even the thick stone tiles!

This saw can tilt to 45 degree for bevel cutting. The mitre gauge on the table can turn to any angle between 0 and 45 degrees for diagonal cutting.

An internal thermostat has been provided to maintain the motor temperature within normal operating ranges. In case the motor is over loaded, gets too hot or the current is too high, the internal thermostat will automatically cut off. If this happens, turn the switch off and wait 5 minutes until the motor has cooled down to restart the machine by on/off switch again. This feature helps to protect the motor from damage due to overheating.

This is a complete package that includes the saw, the stand, the jigs and even a blade.

• 120V / 60Hz
• 900W motor
• 7000/min no load speed
• 7" blade size
• Table Size 16" x 18"
• Net weight 65 lbs